Where to go around here to weigh car?

[Stopsign32v]

I need to figure out how much my car weighs for some suspension work. Does anyone know of somewhere in the Greenville/Spartanburg area?

[Napalm331]

You can go to CRG on Wade Hampton Blvd. just outside Greer. The scales are very accurate.

[Napalm331]

.........and free.

[2001z]

Is it directly off wade hampton? Do you just drive up there and they dont ask any questions?

[Stopsign32v]

What is CRG?

Off topic: Good God, that Mustang looks sick!

[The EnforceR]

Its a recycling center/scrap yard.

[Stopsign32v]

Its a recycling center/scrap yard.

That sounds like an awsome way to get a nail or screw in your tires.

[atlblue98gt]

its CRC isnt it? You dont have to take anything to recycle? To pull up to weigh yourself? Ive taken a few loads there before in the tahoe.

[Diggler]

i have been on the lookout for 4 corner scales....

[bags50lx]

I can do it for a small fee.

[01BlackBird]

bring it to shadyside sunday and you can weigh it on there scale

[Stopsign32v]

I've heard truck stops and some trucker gas stations have drive on scales.

[Stopsign32v]

bring it to shadyside sunday and you can weigh it on there scale

Don't want to drive over an hour to weigh my car.

[axistang]

Don't want to drive over an hour to weigh my car.

Mintz Scrap Iron & Metal Inc‎
395 Magness Drive, Spartanburg, SC‎

They have a scale that is pretty accurate. You can drive on it after hours. Very clean paved area.

My 94 GT with full interior, Corbeau front seats, AC, power everything, 17s, AFRs, blower, 5-spd was 3,240lbs.

The '87 LX hatch AOD is 3,000 lbs all stock.

[rmtt]

Mintz Scrap Iron & Metal Inc‎
395 Magness Drive, Spartanburg, SC‎

They have a scale that is pretty accurate. You can drive on it after hours. Very clean paved area.

My 94 GT with full interior, Corbeau front seats, AC, power everything, 17s, AFRs, blower, 5-spd was 3,240lbs.

The '87 LX hatch AOD is 3,000 lbs all stock.

+1. i have been there several times. I know the owners real well, and they have never had an issue with it.

[Stopsign32v]

Mintz Scrap Iron & Metal Inc‎
395 Magness Drive, Spartanburg, SC‎

They have a scale that is pretty accurate. You can drive on it after hours. Very clean paved area.

My 94 GT with full interior, Corbeau front seats, AC, power everything, 17s, AFRs, blower, 5-spd was 3,240lbs.

The '87 LX hatch AOD is 3,000 lbs all stock.

Sweet, I might do this! So you say you can drive on it after hours? That would be nice and wouldn't hold up their work day.

[Stopsign32v]

Mintz Scrap Iron & Metal Inc‎
395 Magness Drive, Spartanburg, SC‎

They have a scale that is pretty accurate. You can drive on it after hours. Very clean paved area.

My 94 GT with full interior, Corbeau front seats, AC, power everything, 17s, AFRs, blower, 5-spd was 3,240lbs.

The '87 LX hatch AOD is 3,000 lbs all stock.

Went there to weigh the car today while they were closed and nothin happened. Scale just read 9999999999999

[Halon330]

Truck stops have certified accurate scales. Big deal for truckers if total weight, or weight per axle is too heavy, or not heavy enough. Any of the truck stops should be able to give you total and per axle weights. I know for certain Cowpens truck stop on exit 83 on I 85 and T/A at exit 63 on I 85 both have certified CAT scales. Pilot on exit 63 may have also.

[98chevyman]

Went there to weigh the car today while they were closed and nothin happened. Scale just read 9999999999999

might had ben from power surge in spartanburg. i would go back tommorow and try again

[BoostedGTA]

Went there to weigh the car today while they were closed and nothin happened. Scale just read 9999999999999

might had ben from power surge in spartanburg. i would go back tommorow and try again

LOL, uh... that post was from 5/15. :whisper:

[DeanJ]

There's a scrap metal recycler on Valley Falls Rd. I pass it every day but can't remember the name(old age). It's just past USCS. These places scales are usually pretty acurate.