Roll bar install ?

[2001z]

Anyone know where to go to have someone make a simple 4 point?Basically all i want is the loop and the 2 bars going back and on top of the hump right behind the seat where the gas tank is and def no center bar enless it is a removable one. I talked to stable but they are really backed up there and prob would be a while before i could get in there.

[1997b4c]

can you order a bolt in?

[2001z]

can you order a bolt in?

Not sure they have bolt in 4 points roll bars.Rksport used to have a nice one but they dont sell it anymore. I dont want a 6 point becouse i dont need the middle or side bars.

[01BlackBird]

wolfe makes 4 point roll bars, kent just ordered one from speed inc. i think its around 400 or somethin like that

[2001z]

wolfe makes 4 point roll bars, kent just ordered one from speed inc. i think its around 400 or somethin like that

Good to know thanks ill chek into in it. One reason i kinda want one local is becouse i really would like the 2 points that go back go to the hump behind the seat and not going through thre rear speakers if possible.

[98chevyman]

yep just ordered mine two weeks ago. i hear wolfe is slow with shipping

[2001z]

yep just ordered mine two weeks ago. i hear wolfe is slow with shipping

How much was yours shipped? I got a price of 555.00 shipped. Seems kinda high for such a simple 4 point. Kinda one reason i want to find a local guy/company.I figure it should be around 100 buck a point installed for something like i want. Just have to find someone or a place around here that does it but having no luck so far.

[Coppertop8705]

i have a fabrication buddy that could hook you up with a custom one. ill shoot him a text and get some pricing for ya.

i was planning on doing one for my car while it was down a 4 point just like yours. maybe we can get a discount on the materials since we buy more

[Green to da Bean]

Stable does barz locally.

[2001z]

Stable does barz locally.

Ya talked with stable but he is really backed up right now.

[98chevyman]

yea the frieght shipping is were u get fukd. Call bruce at hawks and see what he will do. He will match price and may even be cheaper

[The EnforceR]

Give Bruce a call....everyone keeps forgetting we make a top notch shop right in our backyard with any part we would need for our cars. He's said he will do his best to match prices if you just give him the oppurtunity to earn your business.

[98chevyman]

im not much of a single shop or single business person myself but i will say hawks has done me pretty decent in the past so id atleast give them a shot.

[The EnforceR]

Not to mention they also support our site here, and help the owners keep things up and running.

[2001z]

Not to mention they also support our site here, and help the owners keep things up and running.

I wrote him a pm but never heard back from him .

[The EnforceR]

They vary rarely check this site, Bruce says they are wide open down there and are nonstop on cars......if you ever need to get ahold of them....just call the shop and ask for Bruce, BJ, Stephen, etc..

[95droptopz28]

I ordered my roll bar from Bruce top notch quality the bar itself came from wolf its a weld in. If you order a weld in hit me up I can give you a hand.

[justamach]

guy in blue ridge area does a great job on stuff like this. he has a full time job during the day and does stuff like this at his house. his name is jessie hicks. hes at greer every week. hes got a mid 60s buick wagon that he usually runs. i hear hes the man at stuff like that

[WhiteIrocZ]

I had a nice black Z in the shop a few weeks ago from Summerville. He had a killer 4 point setup that the rear bars went all the way down into the T top well. He had it made at a fab shop. I'm thinking of something like that as an afterthought after my swap.

It had a b pillar bar that was removable for a harness mount also, but you could take it out and sit in the back seat if need be. BTW, it was just a cammed car, but he done it to stiffen it up and says he swares by it.

[The EnforceR]

Guy came all the way from Summerville for window tint?

[89RABIDFOX]

the jesse hicks done the 10 pt in my buddy chris coupe car. he does good. kinda slow but good work.

[justamach]

yea, he is kinda slow, but it is a one man shop and he does it second to his full time job

[Herron Performance]

Talk to Stable or ride down to Summit and get their kit and then let me know and I can have it welded in.....

[Herron Performance]

not to mention they also support our site here, and help the owners keep things up and running.
wrong

[95droptopz28]

Can have me weld it in. I can also weld chrome moly.

[The EnforceR]

Just noticed that Hawk's isn't a sponsor anymore. My bad!

[Nauty99SS]

Can have me weld it in. I can also weld chrome moly.

this man ready to do work !!