PDA

View Full Version : My car won't start.


keith_AE2010
12-07-2009, 08:08 PM
Don't know where to put this, I just need help if you guys know anything about vats or anything like it please.

So I got up this morning and go to class, and my car starts fine and runs fine. Nothing out of the ordinary until I leave school today. I haven't done anything to the car, this is just a random occurrence. I can turn the key part of the way and see the lights on the dash come up like normal, and hear the fuel pump priming like normal, but the security light is flashing as long as the key is halfway turned. The car won't do anything when I turn the key the rest of the way.

Is this a VATS problem? I don't care if I can't use it anymore...I just want my car to work every time I need it. SO will the bypass work for it? I need help as this is my dd and it is stuck in the lot at school and won't move. It has never done this before, and I need the car asap to work again. Maybe the chip just got old, so I tried my spare with still no luck. Any help?

Herron Performance
12-07-2009, 08:36 PM
turn the key on and let it sit for a little while like that and then see if it will start.
did you try and clean the key and blow in the key hole (:lol:)

keith_AE2010
12-07-2009, 08:37 PM
No, I have an exam in the morning so I'll be going back to school. I'll try these things. Also gonna check all my fuses when I get there, as my power seat and rear defrost have died recently. Anybody want to buy a camaro?

Herron Performance
12-07-2009, 08:39 PM
$500 site unseen

keith_AE2010
12-07-2009, 08:43 PM
Na it has a pretty new engine in it haha. Its just a v6, I don't care about the car anymore. I should have just gotten a z28 in the first place, but I'm so over fbodys in general. This sucks because now I have to bum rides all the time. ugh

Herron Performance
12-07-2009, 08:47 PM
$400 and I do think i might have seen it...

2001z
12-07-2009, 08:48 PM
Friend had the same prob and we bypassed the ignition switch by measuring the resistance on the chip that is on your key . Then getting some resistors from radioshack and bypassing the switch by putting the resistors on the wires under the dash for vats and it is still working to this day. It was his ignition switch not reading the resistance in the key therefore the security light would blink and that is about all it would do besides the fuel pump. Was a 1.00 fix and there is a good write up on tech on what wires to put the resistors on and whatnot.

keith_AE2010
12-07-2009, 08:52 PM
Do you have a link? I have searched and searched and all I have found is talk of this "writeup" lol. Can't find it. So, where do I get something to test my key? And also, how do i wire in the new resistor once I get the right one?

Need a little more Shon. And yeah you prob have seen it around Seneca or at least a pic or something. If you saw it recently, it had chrome SS wheels.

2001z
12-07-2009, 08:55 PM
Do you have a link? I have searched and searched and all I have found is talk of this "writeup" lol. Can't find it. So, where do I get something to test my key? And also, how do i wire in the new resistor once I get the right one?

Need a little more Shon. And yeah you prob have seen it around Seneca or at least a pic or something. If you saw it recently, it had chrome SS wheels.

More than likely your gonna need more than one resistor to get the exact one becouse it has to be almost exact as your key. Do you have a meter that reads ohms? To test it you just put one lead on either side of the chip and it will give you the ohms enless your key is no good which is very unlikely. Ill see if i can find the write up on it.

2001z
12-07-2009, 08:58 PM
Here you go read this .
http://www.ls1.com/forums/showthread.php?t=61262

keith_AE2010
12-07-2009, 09:01 PM
Thank you! I'm reading it now. I have found a little info from searching. But anyways, once I get my resistor things from Radioshack, how do I splice them into the wire they need to go...I found a pic of which one I need to put it in.

keith_AE2010
12-07-2009, 09:02 PM
Ok, so is there some where I can rent an ohm reader like Advance rents tools sometimes?

keith_AE2010
12-07-2009, 09:23 PM
Ok nevermind. I found out I can get an ohmmeter for like 5 bucks at any autoparts store. And then just stick my new resistor into the clip and tape it if it works.

The EnforceR
12-07-2009, 09:33 PM
car wont start, its fallin apart. i was late for work and the boss got smart. panty line shows, got a run in my hose. my fair went flat, MAN i hate that.....

sry, reminded me of a little shania twain!

keith_AE2010
12-07-2009, 09:40 PM
Oh MY WORD. Thanks for the humor though.

keith_AE2010
12-07-2009, 10:25 PM
So if I use the method of just sticking the resistor in the back of the connector and not cutting lines and soldering...then if I need multiple ones, how do I do it?

2001z
12-08-2009, 05:28 AM
So if I use the method of just sticking the resistor in the back of the connector and not cutting lines and soldering...then if I need multiple ones, how do I do it?

Put them in series. You might be able to find the exact one but we couldnt find one and had to add like 4 to make it work. we just stuck his in the connector and taped it up.

jmd
12-08-2009, 06:29 AM
car wont start, its fallin apart. i was late for work and the boss got smart. panty line shows, got a run in my hose. my fair went flat, MAN i hate that.....

sry, reminded me of a little shania twain!

hope you were not chokeing the chicken while thinking of shania twain and singing that song. lol

keith_AE2010
12-08-2009, 07:09 AM
Put them in series. You might be able to find the exact one but we couldnt find one and had to add like 4 to make it work. we just stuck his in the connector and taped it up.

Ok so putting them in series just means putting them all together in there?

Whyte864
12-08-2009, 08:32 AM
damn dude that's happened to me before when i had my jeep in high school. went to start her up one day after school and got nothing. then ended up locking my keys in the car too. So after mom brought me a fuse and a coathanger, i got her back on the road. It is a bummer tho, but don't lose hope bro. I can't tell you how many things went wrong on my truck and how many times i said "man i hate this piece of shit" but i really miss that truck now. But the LS1 f-body helps :)

2001z
12-08-2009, 02:33 PM
Ok so putting them in series just means putting them all together in there?

Series is connecting one end to another and so on till they all equal the resistance you trying to get. Once you do that take either end of the series of resistors an put them in that connector. It might take you a few tries if that is whats wrong with your car which sounds like it to me..

1997b4c
12-08-2009, 03:05 PM
can you turn vats off with hp tuners?????

WhiteIrocZ
12-08-2009, 03:14 PM
You can but this is the cheaper way to do it instead of buying credits.

TurboLSX
12-08-2009, 03:36 PM
can you turn vats off with hp tuners?????

yeap come to my house, i will turn them off for FREE. :secret:

BluByU383
12-08-2009, 03:49 PM
If you need a wrecker....call me.

2001z
12-08-2009, 04:48 PM
yeap come to my house, i will turn them off for FREE. :secret:

You cant beat FREE!

NEMESISVETTE
12-08-2009, 06:42 PM
Happy BirrrfDay Keith

keith_AE2010
12-08-2009, 08:59 PM
Thanks Nemisis for the birthday wish! It was a good one and I'm not as much of a little kid haha. Got the car fixed, had to twist up two resistors, but it works now..........woo hoo.

keith_AE2010
12-08-2009, 09:00 PM
Oh and I still hate the car. I wanna get rid of it. Terry, you have a wrecker?

Whyte864
12-08-2009, 09:25 PM
I'll take it off your hands for ya, even let you keep the motor :D lol

keith_AE2010
12-08-2009, 09:31 PM
HAHA! You wouldn't get a whole lot then...she's gutted.

Herron Performance
12-08-2009, 09:32 PM
$300 and you keep the motor.

keith_AE2010
12-08-2009, 09:33 PM
Lol I can't. When the 89 is on the road I am thinking about selling it or just swapping engines.

BluByU383
12-08-2009, 09:50 PM
Oh and I still hate the car. I wanna get rid of it. Terry, you have a wrecker?

Yep.....F450........The BIG TOW Inc........for real.

keith_AE2010
12-08-2009, 10:12 PM
Nice! I was with a friend whose clutch completely went out and then he tried to pull off the road and it was raining so he slid into a ditch. Had to wait an hour for a tow truck. Stupid Miata

Whyte864
12-10-2009, 12:56 PM
lol a shell works. If i took it from ya with no motor it would just end up being home to the LSX427.....that i'm buying......one day....i swear...hahaha

keith_AE2010
12-10-2009, 03:57 PM
Haha! If it has that in it, it BETTER be mine.

Whyte864
12-10-2009, 06:38 PM
Haha well i'd probably let you drive it up and down the road a few times

keith_AE2010
12-10-2009, 07:13 PM
hehe, I wouldn't know what to do with all that power.

Whyte864
12-10-2009, 08:17 PM
haha you and me both but i'm damn willing to find out whenever i got a spare 12 grand to drop.

2001z
12-10-2009, 08:27 PM
Go for broke and do a 572 big block. Dont see that everyday lol.

keith_AE2010
12-10-2009, 08:29 PM
Haha, yeah. I don't know if I wanna v8 swap this car or my 89 Camaro. I kinda wanna leave the v6 in the 89 and turbo it.

punisher
12-11-2009, 01:41 PM
Id say blame it on the opti but u don't have one.

keith_AE2010
12-11-2009, 02:44 PM
Haha, I kinda wanna just make my 89 a dd, and finish gutting out the 98 and swap it to race.