Herron Performance
11-03-2009, 04:32 PM
CNC'ed Jounce bumpers w/replacable poly bumpers and possible slight bending of lip(arrow in pic) to bolt up (bending might be needed to clear your rims depending on each car's set up).
These offer replacable snubbers you can pick up at Advance Auto or AutoZone for like $10 but I really doubt you will be replacing these any time soon, the stock rubber units will be replaced several times before the poly units will need to be replaced.
If the snubbers end up being too tall and do not offer enough suspension travel you can cut the snubber to offer more travel but really doubt you will need to do this.
https://securehost98.hrwebservices.net/~herronp/store/images/uploads/bump%20stop%20with%20jeep.jpg
$65 shipped with RED or BLACK snubber
These offer replacable snubbers you can pick up at Advance Auto or AutoZone for like $10 but I really doubt you will be replacing these any time soon, the stock rubber units will be replaced several times before the poly units will need to be replaced.
If the snubbers end up being too tall and do not offer enough suspension travel you can cut the snubber to offer more travel but really doubt you will need to do this.
https://securehost98.hrwebservices.net/~herronp/store/images/uploads/bump%20stop%20with%20jeep.jpg
$65 shipped with RED or BLACK snubber