my track times

[Ks00Ws6]

i know its late but its been my first chance to get on here but...
sunday my car ran 8.6x at 82.xxmph
at shady side
with adam driving it
okay thanks : )

[Herron Performance]

COOL.
Now it's time to mod it more!

[Ks00Ws6]

headers will be next lol

[The EnforceR]

thats cute, yall make up?


haaha just messin....good times

[01BlackBird]

theyre so cute wait who the heck is adam? lol dont you mean ED!!!!!!

[Ks00Ws6]

just friends he got a gf lol

[Eds98WS6]

Yea just drove the car no big deal hope driving other peoples cars means you like them or I'm cuz I'm sure some guys on here driven some other guys cars and don't think Anyone here gay.

[MrDavid]

and don't think Anyone here gay.

Wrong. Bluemongoose is gay. :taunt:

[WhiteIrocZ]

Lol...Ed chiming in on the defense. Pretty good times Katie, but I vote to buy a converter with a higher stall speed before anything. That is the biggest improvement for the money IMO for an auto car. If you decide to do it, I can put it in for ya cheaper than a transmission shop.

[Eds98WS6]

The 8.6 was with like a 2.008 sixty or something hooked almost dead after small burnout and 1200 rpm launch.

[Ryans_Pewter_SS]

Nice times! Sorry I didn't get to talk to ya. I say get the converter also!

[Eds98WS6]

She don't go a lot I can get this car running bottom 8's with headers. a stall will probably keep it from hooking then she have to spend more on radials and I think it run bottom 8 like I said with street tires, just the same as with converter and radials. So basically wait on stall

[WhiteIrocZ]

No traction is a problem that has to be fixed sooner or later....

BTW, here is a triple disc vig 3200 converter still in the box from PI, $650 shipped. Thats a little overkill for a basically stock car, but also a $950 converter new.

http://www.ls1tech.com/forums/lsx-parts-sale/1086596-4l60e-vigilante-triple-disk-3200-converter-essentially-new.html

[Ryans_Pewter_SS]

But leaves room for upgrades that she will want!!!

[Herron Performance]

Jeff's Red TA with a SS3600 went 8.0s.

[RamAirGod]

Since its a auto, let her drive. Practice makes perfect...

[Ryans_Pewter_SS]

Since its a auto, let her drive. Practice makes perfect...

Thats what I say! She'll get the hang of it!!!

[Eds98WS6]

She wanted me to she drove it at track before. She just wanted the best out of it and I ran a 8.6 at almost 83 with basically a 2.0 60 with a .009 rt cuz I'm baller lol

[01BlackBird]

go ahead and throw headers on it. my car runs 8.2's with just headers, magnaflow, and a lid. that will ne enough to make her happy for a while and get her used to driving it.

[Ryans_Pewter_SS]

What gear is in her car? That will make a difference. My car with gear and exhaust went 7.80

[406malibu]

damn, all of yall with your 8.2's and 7.8's with just gear and exhaust... I need to work on my 60', or get some good rubbers. guess a shift light wont hurt either ;)

[WhiteIrocZ]

or get some good rubbers

Always a good thing not to skimp on.

[406malibu]

Always a good thing not to skimp on.

i got a couple good ones lying around, but dont think they would work on the car :silly:

[98chevyman]

dont feel bad im still stock 342 gear with a 383ci and only run 7.90 and hass way more potential but likes to spin ALOT! ask whiteirocz about 80mph burnouts with my mom in the car on 26.

[WhiteIrocZ]

dont feel bad im still stock 342 gear with a 383ci and only run 7.90 and hass way more potential but likes to spin ALOT! ask whiteirocz about 80mph burnouts with my mom in the car on 26.

Yeah you were definitely boiling them off. When we were coming off the exit, we were thinking the same damn thing. We kicked them at the exact same time and you just spun away from me. Its sad that you can leave black marks on 26 (which are still visible) and walk away from me at the same time.

[BoostedGTA]

Jeff's Red TA with a SS3600 went 8.0s.

Best mod hands down... I ran 8.0's with the converter and drag radials while still being quiet (stock exhaust, manifolds, cats). Can't go wrong with the converter!

Btw, her gear should be a 3.23 if it's a WS6.

[Camaroslpss]

I think its time for a bigger cam! Hell with low compression:mad: (for me that is)

[Ks00Ws6]

That sounds nice but im still waiting on that money tree lol

[MrDavid]

I think its time for a bigger cam! Hell with low compression:mad: (for me that is)

I've got a MS4 with your name on it. You can't get a whole lot bigger than that.

[TurboLSX]

I think its time for a bigger cam! Hell with low compression:mad: (for me that is)

big cams and low compression....not a great idea, mill those heads if anything. get up around 10.5 or higher.

[Herron Performance]

dont feel bad im still stock 342 gear with a 383ci and only run 7.90 and hass way more potential but likes to spin ALOT! ask whiteirocz about 80mph burnouts with my mom in the car on 26.

What heads are on this car?

[01BlackBird]

What heads are on this car?

patriot stage 2 ls6 heads but the engine is 9.5:1 comp with original plans of boost one of these days

[punisher]

there was alot of people last sunday, great weather, my dads clone cobra lol, ran 8.4.

[Ryans_Pewter_SS]

there was alot of people last sunday, great weather, my dads clone cobra lol, ran 8.4.

was it yellow?

[sepno77]

was it yellow?

yeah
1st run ran shitty cause he had the trany on 2 instead of D
2nd run he ran the 8.4

[Ryans_Pewter_SS]

I remember it, looks pretty good! Had trouble staging

[sepno77]

I remember it, looks pretty good! Had trouble staging

my o mans 1st time at the track. the guy told him his tires were still wett and to back up and do it again. plus we ran prostar not good for 1st timers lol

btw is your car silver?

[Ryans_Pewter_SS]

my o mans 1st time at the track. the guy told him his tires were still wett and to back up and do it again. plus we ran prostar not good for 1st timers lol

btw is your car silver?

It's Pewter, I was running protree.

[2001z]

^^ Off topic but ryan your new rims are badass you need post them up !

[sepno77]

ya i seen you runing it. your car is bad ass. i was pointing out your car to my brother at the track lol...i love that hood on the car looks mean as fuck. what did you run?

[Ryans_Pewter_SS]

I've only got one pic with them, don't know how to post.

[sepno77]

you should just register at cardomain.com and make a lil car profile. you could post lots of pics there and just put it in your profile as your homepage.

[Ryans_Pewter_SS]

ya i seen you runing it. your car is bad ass. i was pointing out your car to my brother at the track lol...i love that hood on the car looks mean as fuck. what did you run?

Thanks man! It didn't do good Sun. Only went 7.10@100 still spinning. I just ordered Spohn drag bar, Spohn LCA's, and Spohn panhard bar from Shon. Should do alot better next week. Doin some changes now and retuning tomorrow and dyno with the changes. Bogarts are also on

[sepno77]

Only 7.1 that aint slow, shit i ran 9.1 with shitty tires. i can't wait for next month to finally tear into my engine.

[NEMESISVETTE]

Thanks man! It didn't do good Sun. Only went 7.10@100 still spinning. I just ordered Spohn drag bar, Spohn LCA's, and Spohn panhard bar from Shon. Should do alot better next week. Doin some changes now and retuning tomorrow and dyno with the changes. Bogarts are also on

Congrats Ryan, that SS will see 6's the next time it see's the track. No doubt. Is there any adjustments to those parts?

[Ryans_Pewter_SS]

Only 7.1 that aint slow, shit i ran 9.1 with shitty tires. i can't wait for next month to finally tear into my engine.

Its slow for what it should be running! It's still a 6spd now Th350 will be in in a couple weeks, with it hooking i figure 6.5's....maybe. Driving it there, full weight with a/c!!!

[Ryans_Pewter_SS]

Congrats Ryan, that SS will see 6's the next time it see's the track. No doubt. Is there any adjustments to those parts?

Thanks Gary, There all adjustable, bought the best I could.

[NEMESISVETTE]

Thanks Gary, There all adjustable, bought the best I could.

So there will be some dialing inn? Or do you have a idea on were to set it?

[Ryans_Pewter_SS]

So there will be some dialing inn? Or do you have a idea on were to set it?

I have no clue, guess I'll talk to Shon. Next week I'm buying some Qa1's for the front. Putting some on the rear now.

[sepno77]

if that stuff aint set right it will kill your 0-60 times and that ta is a bitch to adj....did you buy the angle finder?

[2001z]

Did you get you some relocation brakets for the lcas? Set your pinion angle to -2 on the yoke.

[Ryans_Pewter_SS]

Did you get you some relocation brakets for the lcas?

I'd better ask, Thanks!!

[Ryans_Pewter_SS]

if that stuff aint set right it will kill your 0-60 times and that ta is a bitch to adj....did you buy the angle finder?

T/A is already on the car, been on since i broke the stock one and stock driveshaft.

[2001z]

I need a set myself maybe he can make a deal on 2 sets.

[2001z]

T/A is already on the car, been on since i broke the stock one and stock driveshaft.

That tq adjustable?

[Ryans_Pewter_SS]

That tq adjustable?

Yeah, it's a Spohn also.

[2001z]

Yeah, it's a Spohn also.

Did you set the pinion angle on it ? You can get an agle finder cheap or just use mine.

[sepno77]

T/A is already on the car, been on since i broke the stock one and stock driveshaft.

dam how did you brake the driveshaft...how much power you putting down? lol

[2001z]

dam how did you brake the driveshaft...how much power you putting down? lol

Stock aluminum driveshaft = toothpick for a manual

[406malibu]

Stock aluminum driveshaft = toothpick for a manual

yup. I have heard of people breaking them at stock power. stock drive train in these cars is FTL

[sepno77]

ya i replaced my stock one w/ an aluminum one. got me a lil worried now.

[Ryans_Pewter_SS]

Yeah it came with an angle finder. Right now its making like 580hp and 649tq or something like that @ the tires. Tomorrow it should make more. Going back to the dyno tomorrow, U coming Tim?

[Ryans_Pewter_SS]

ya i replaced my stock one w/ an aluminum one. got me a lil worried now.

My car hooked that day! Was supposed to be too cold outside for the track to be open.

[2001z]

Yeah it came with an angle finder. Right now its making like 580hp and 649tq or something like that @ the tires. Tomorrow it should make more. Going back to the dyno tomorrow, U coming Tim?

Didnt know you were even going? What time are you heading up there?

[sepno77]

wow thats impressive. is that on the bottle?

[NEMESISVETTE]

What time?

[Ryans_Pewter_SS]

Yeah thats bottle. Not real sure when I'm going, gotta talk to BJ. Retuning it, it was rich last time. Got the Nano on and rejetted. Should be over 600hp and over 700tq this time

[Camaroslpss]

I've got a MS4 with your name on it. You can't get a whole lot bigger than that.

I think thats just a little bit to big for an auto lol. I was going to go with the ms3 but i read that it didnt make good power under the curve. Im thinking of the F14 but not sure right now!

[2001z]

Yeah thats bottle. Not real sure when I'm going, gotta talk to BJ. Retuning it, it was rich last time. Got the Nano on and rejetted. Should be over 600hp and over 700tq this time

Very cool you putting in the 200 jets. I might have to come see this im very intrested in the nano !! Let me know when your heading up there

[2001z]

I think thats just a little bit to big for an auto lol. I was going to go with the ms3 but i read that it didnt make good power under the curve. Im thinking of the F14 but not sure right now!

I think both those cams are to big for a stockish stall. I would get a bigger stall before a cam but just my opinion.

[MrDavid]

You are going to need a bigger stall with either of those cams.

[Camaroslpss]

You are going to need a bigger stall with either of those cams.

Yea i know. Im going buying the Yank SS4000 more than likely. Im getting a set of wheels first.

[Ryans_Pewter_SS]

Very cool you putting in the 200 jets. I might have to come see this im very intrested in the nano !! Let me know when your heading up there

Yeah! And got everything for the Nano. Hope it goes good!!! I'll let u know when.

[MrDavid]

I've only got one pic with them, don't know how to post.

http://i79.photobucket.com/albums/j129/mrdavid777/GetAttachmentaspx.jpg

[Ryans_Pewter_SS]

Thanks David!

[2001z]

rims look badass ryan!

[Ryans_Pewter_SS]

rims look badass ryan!

Thanks alot Tim!!!

[Eds98WS6]

thread jack ftw:off topic:

[406malibu]

thread jack ftw:off topic:

why do you care :taunt:

[NEMESISVETTE]

why do you care :taunt:

Cuz he used to hit dat. Used 2

[Eds98WS6]

Yes that is exactly the reason. Way to be mature. It has nothing to do with that shit, given the fact that if when in another thread it gets off topic people say the same dang thing and dont catch hell about it. Yes im sure you all know we used to date, key word USED to, ive been dating the girl im now with 9 months can we move the hell on pretty sure we have.

[NEMESISVETTE]

Lol

[Eds98WS6]

lol i typed all that and get an lol....figures :crash:

[WhiteIrocZ]

Where in the hell have you been hidin Ed?

[MrDavid]

Calm down Edward. Don't pay attention to Nemesissy. He gets irritable at times cause everyone and their brother wants to race him.

[Eds98WS6]

lol not been hiding been with my new gf in the process of college, work, and getting my life together and out of debt.

[2001z]

lol not been hiding been with my new gf in the process of college, work, and getting my life together and out of debt.

That def will keep you busy!

[Eds98WS6]

Yea just have to put cars on hold for a while for the most part.

[NEMESISVETTE]

lol i typed all that and get an lol....figures :crash:

lol not been hiding been with my new gf in the process of college, work, and getting my life together and out of debt.

Yea just have to put cars on hold for a while for the most part.

Off Topic

[406malibu]

Off Topic

should call you the enforcer.... :rrofl: