View Full Version : Any good tuners around???
Ryans_Pewter_SS
11-05-2008, 05:14 PM
I just finished my car. I am working in Clemson at Oconee Nuclear station and I don't really wanna drive all the way to Mooresville to Alvin. Does anyone know where to take it to Dyno and tune that will do a good job? Pretty quick?
MrDavid
11-05-2008, 05:15 PM
Tuning a Carbed engine right?
Ryans_Pewter_SS
11-05-2008, 05:16 PM
No its Fuel inj. Looks Carbd though
MrDavid
11-05-2008, 05:18 PM
If you're in Clemson, then you're close to Anderson where Amazon tuning is. Kyle and I talked to Rick last year and he said back then that he had been tuning more LS1 cars than Cobra's lately. Seems to be mixed emotions about him around here though.
Ryans_Pewter_SS
11-05-2008, 05:21 PM
I had it done by Alvin at PCM4less with the old motor, and I heard he is one of the best, he did a good job, i just don't wanna leave it for days like he wants. How can I get in touch with Amazon? Does anyone else reccomend anyone else?
MrDavid
11-05-2008, 05:46 PM
amazonracing.com
The EnforceR
11-05-2008, 06:56 PM
hawk's is also down that way in easley
Herron Performance
11-05-2008, 07:39 PM
I would let Charles (aka CDub or Trophystock) or Mark at Stable over anyone listed so far.
TURBO
11-05-2008, 07:42 PM
^ I agree.
Herron Performance
11-05-2008, 07:45 PM
I just finished my car. I am working in Clemson at Oconee Nuclear station and I don't really wanna drive all the way to Mooresville to Alvin. Does anyone know where to take it to Dyno and tune that will do a good job? Pretty quick?Where did you end up staying?
Might see my LT1 car on the road now that it drives and looks better, LOL
Diggler
11-05-2008, 08:03 PM
i let charles drive my car with the wideband for a couple days and he hooked it up!! it drives like a stock car now just about. you can only tell it has a cam at idle and when letting out on the clutch. its a tsp233/239 cam, btw.
6th gear works just fine lugging down to 1200rpms and whatnot. the only way you will get a GOOD tune is to leave it with someone for awhile. cant get that by putting the car on the dyno for 2 hours. i know from experience and the $400 i wasted on a dyno tune from a VERY well known shop in nc.
Ryans_Pewter_SS
11-05-2008, 08:12 PM
thanks alot, I drive everyday, about an hour and 50 min one way. I saw a red lt1 SS the other day that looked real good!
The EnforceR
11-05-2008, 08:18 PM
wow that long ride must be justified by a very rewarding salary!
Ryans_Pewter_SS
11-05-2008, 08:19 PM
Yes it is!!! I can't complain at all about it!
Herron Performance
11-05-2008, 08:21 PM
wow that long ride must be justified by a very rewarding salary!Contract employees make pretty good, per diem, travel expenses and probably lodging which I would guess he is banking.
Ryans_Pewter_SS
11-05-2008, 08:23 PM
525$ a week tax free, +the big paycheck, 40hrs straight 32 time and half
MrDavid
11-06-2008, 04:16 AM
Geez, you are making some peeps yearly salary in a few months.
Herron Performance
11-06-2008, 06:13 AM
Geez, you are making some peeps yearly salary in a few months.he does and wonder what his radiation exposure is???
Just be careful over there, my dad worked there 30+ years.....and I live 2 miles from it....
Green to da Bean
11-06-2008, 09:25 AM
My car glows green and has 3 headlights after stealing parts from Shon's house.
silver455
11-06-2008, 10:04 AM
My car glows green and has 3 headlights after stealing parts from Shon's house.
are radiated parts still considered bolt-ons :dunno:lol
Ryans_Pewter_SS
11-06-2008, 10:09 AM
LOL! I'm usually never exposed to radiation. Every once in a while i am. I'm a rigger.
Green to da Bean
11-06-2008, 11:03 AM
are radiated parts still considered bolt-ons :dunno:lol
Only on 2 valve 4.6's.
406malibu
11-06-2008, 11:16 AM
LOL! I'm usually never exposed to radiation. Every once in a while i am. I'm a rigger.
hey, no need to be racist about it.
Ryans_Pewter_SS
11-06-2008, 01:32 PM
Lol!!!
Sonicblue04L
11-06-2008, 10:45 PM
I HIGHLY recommend rick at amazon tuning solutions to tune your car. I'm not sure if its b/c i'm on ford forums more but with lightnings/cobras i've never heard one complaint about him. Maybe showing lower numbers because he uses a mustang dyno, but the tunes are perfect. but anyways i've seen people drive all over just to get their car tuned by him including ford gts and vettes. ATS FTW
RamAirGod
11-07-2008, 12:52 AM
525$ a week tax free, +the big paycheck, 40hrs straight 32 time and half
where do i sign up at??
DTSVT03
11-07-2008, 08:10 AM
I HIGHLY recommend rick at amazon tuning solutions to tune your car. I'm not sure if its b/c i'm on ford forums more but with lightnings/cobras i've never heard one complaint about him. Maybe showing lower numbers because he uses a mustang dyno, but the tunes are perfect. but anyways i've seen people drive all over just to get their car tuned by him including ford gts and vettes. ATS FTW
Im with this guy. My cobra is there now getting the engine rebuilt and adding a turbo kit and some other small things. Rick knows his stuff, he travels all over the country to do dyno tuning days, so people must really like his work.
Diggler
11-07-2008, 11:00 AM
Rick knows his stuff, he travels all over the country to do dyno tuning days, so people must really like his work.
same thing with the terrible tuner that tuned my camaro a couple years back. charles just fixed. it. :thumbs up:
Ryans_Pewter_SS
11-07-2008, 11:52 AM
where do i sign up at??
If your interested, The name changed to DZ Atlantic. You can do a resume online. They really love welders if u can do that!:thumbs up:
MrDavid
11-07-2008, 11:55 AM
They really love welders if u can do that!:thumbs up:
Thats what I've been doing for the past 3 years! Sign me up!
Ryans_Pewter_SS
11-07-2008, 12:11 PM
Send them a resume! Welders make very good money. All u gotta do is pass there test, they have a few. You won't regret it. You might have to drive a little to work but its worth it
vBulletin® v3.8.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.