PDA

View Full Version : anyone know anything about alky inject w/nos

TurboLSX
11-18-2006, 10:25 PM
ive been toying with the idea. subing in alky instead of fuel on a wet shot. what do you guys think?
MrDavid
11-18-2006, 10:51 PM
I think you are Supra huntin!
TurboLSX
11-18-2006, 10:54 PM
I think you are Supra huntin!

you know it. im at a fork in the road. one way nitrous and alky, other road. custom turbo/procharger. im thinking turbo just i have some much nos stuff its crazy
MrDavid
11-18-2006, 10:58 PM
well my .02 is since you already have heads and cam, I would stick with N/A and spray the hell out of it. You already have the stall to for the track, don't wait on the turbo lag to finally catch up, get the instant power with the juice. Forge it an put a 300 shot.
TurboLSX
11-18-2006, 11:09 PM
well my .02 is since you already have heads and cam, I would stick with N/A and spray the hell out of it. You already have the stall to for the track, don't wait on the turbo lag to finally catch up, get the instant power with the juice. Forge it an put a 300 shot.

yeah but im thinking forging it this winter after the wedding aanyways. so really its 650 rwhp on spray or turbo? i think ill have a 250 on my within the next month.
Tailwind
11-19-2006, 02:28 AM
ive been toying with the idea. subing in alky instead of fuel on a wet shot. what do you guys think?

Probobly have a lot of time and effort invested and then decide it wasnt worth it. Heck just use nitro methane instead of alchohol. Get some real effect
TurboLSX
11-21-2006, 07:59 AM
Probobly have a lot of time and effort invested and then decide it wasnt worth it. Heck just use nitro methane instead of alchohol. Get some real effect

well the alky is worth it. it is much easier to tune because you can go up to 40% too rich and not lose any power. apposed to petro where 12.6 is best and richer with make less power. it is complicated and alky also will cool the cylinder temps along with the exhaust temp while keeping cylinder pressure up. race gas wont do either.
MrDavid
11-21-2006, 11:27 PM
hey chris, if you are still looking for an alky system then check this thread out:

http://www.ls1tech.com/forums/showthread.php?t=565795
98chevyman
11-22-2006, 02:22 AM
im not up to date with this alky system what the hell is it
MrDavid
11-22-2006, 07:35 AM
alchole injection system.
98chevyman
11-22-2006, 02:39 PM
o ok ive never seen that abreviation
TurboLSX
11-22-2006, 07:04 PM
hey chris, if you are still looking for an alky system then check this thread out:

http://www.ls1tech.com/forums/showthread.php?t=565795

yeah i usually build my own for about 80 bucks total. heck the pumps are shurflow which are at the tool shed for 50.00 on woodruff. i already looked:tbird:
hi officer
12-01-2006, 11:39 PM
how much experience do u have building them, im interested in building one, just looking for some advice or a parts list
204Denali
12-02-2006, 06:55 PM
Well I believe straight alky has a OCT rating of around 130, as far as using it to replace the additional fuel? I am not sure, I dont see why it would not work but I am no alky expert either. I know that if you do it will lower your injecter duty cycle if that is a issue for you.
I know my injectors are maxed but I am not doing alky, rather just going for some 60lbers or so. Apples to oranges soo..